BASIC FOUNDATIAN AutoCAD 3

Basic Foundation AutoCAD 3

Success is my raight, "Bai He Gu In", "15 Wisdom Sucsess"Andrie Wongso"

Hello, we meet again, Peace be unto all,.

"Overview of AutoCAD Info".

AutoCAD is a CAD program pupoler standards-based windows, which started around the release about 13 (thirteen) in 1999 under a program that uses a keyboard without a facility that is not maximized. As the times and the Information Technology (IT) so that the CAD and breeding programs always release 14 (fourteen) ± in 2000 finally came out, and or orbit again release 15 (fifteen) ± also called AutoCAD 2001, 2001, eventually with all AutoCAD enhancements and new facilities that the new orbit again until now 20xx AutoCAD, AutoCAD ... maybe tomorrow.? The presence of a new facility in AutoCAD aims to further optimize and accelerate the design process, to be able to use the new facility will require a learning process (let's try) things that are positive. For this paper comes as a means of learning process for us who want to progress and who want to use the basic facilities available in AutoCAD quickly and accurately as well as efficiency. This paper only discusses the basics of AutoCAD to be able to read well, most do not already know the basics of using a program design in AutoCAD, the author finally say good luck and thanks for all.

Ok, now :

01. Arc = can roughly be said to be (½) half-circle, click and look at the arc command com, command: there is written determines the starting point or center, so choose one of them and or can also direct, example: click on the bow, and then click (put the cursor) on the first point and then (put the cursor) on the second point and end by pressing enter, and or click on the arc and determine the first point select '(c)' press enter then love the nominal rate (free) and then press enter see the result. 

02. Circle circle = called. Click the circle determines the first point and then click any place, and then specify the second point, a circle. And or click on the circle and see com command: select one, example: click the circle press the letter 'r' and hit enter or the radius of the nominal love numbers (free), then love the nominal rate (free) and enter 2x (twice) and then see results of the circle. {[(While giving the number to 2 (two) in com commands: circle or diameter) select one of them, you press enter the nominal value and press enter]}.

03. Revision Cloud = approximately shaped like a bow multi-line, click the revision cloud (starting point) and then click any (free) and connect to the starting point, without pressing enter. And also click on the revision cloud or see com command: select one of them, for example: 'a' (arc length) press enter to give the nominal rate (free), hit enter 2x (twice) and then select a line or an existing object , then click and select one yes or no and press me to end.

04. Spline = line unevenly shaped and can be called a wavy line of longitude, for example: click the spline determines the starting point (free) and then specify the point to the two (free) and see com command: select one or a close tolerance fit, if you want to end the command stay you chose 'c' and press enter and or also type 'f' for a nominal number you want (tolerance fit): <0000> and press enter 4 (four) times to end the command.

05. Ellipse = line or object shaped roughly like a speech impediment, click the ellipse determines the starting point (free) and then specify a point to 2 (two) and then click to end the command. Or click on the ellipse and take a look at com commands: (from ellipse or arc center) select one of them, for example; click the ellipse press 'c' love tap nominal enter the desired number and press enter then specify appoint 2 (two) after that com we look again at the command: select one of them again, the example; press 'r' or press enter seteleh rotation is click once (without press enter). 

06. Ellipse Arc = ... .. (continued).