BASIC FOUNDATIAN AutoCAD 4

Basic Foundation AutoCAD 4

Success is my raight, “Yu Gong Yi Shan”, (“15 Wisdom Sucsess”Andrie Wongso”). hello, see you again best wishes to all.

"Flashback CAD" 

AutoCAD is a CAD program pupoler standards-based windows, which began the release of about 13 (thirteen) below 1999. Where the program using the keyboard, without this facility is not maximized. As time went on and development of Information Technology (IT) so CAD is always adapting, finally released the program 14 (fourteen) of 2000 ± out again, then the orbit of another release 15 (fifteen) of 2001 ± also called AutoCAD 2001. Final word with all the improvements and new facilities orbit newer AutoCAD, AutoCAD 20xx until now, maybe tomorrow ... AutoCAD ? The presence of a new facility in AutoCAD aims to further optimize and accelerate the design process, to be able to use the new facility will require a learning process (let's try) things that are positive. For this paper comes as a means of learning process for us who want to progress and who want to use the basic facilities available in AutoCAD quickly and accurately as well as efficiency. This paper discusses only the basic things in AutoCAD to be able to read well, most do not already know the basics of using a program design in AutoCAD, the author finally say good luck and thanks for all.

Ok, Now :

01. Arc Ellipse = almost the same as elipse, but the enhancements only on the arc, elliptical arc click again to determine the starting point and then specify the last point and then click 3 (three) times; without press enter, or r click the ellipse arc and see dicommand com: select one command, example: click on an elliptical arc choose 'c' or enter the first digit of the press center to give the nominal (center) is press enter, look again dicommand com: endpoint nominal axis gives the second number press enter. In the arc of the ellipse is almost invisible, then dicommand com: select one of them, for example: press 'r' or rotation, and then press enter then look again dicommand com: major axis, giving a nominal level that we want, then 'press p' or parameters to give a nominal price, then look again dicommand com: to end the press hiruf 'i' or the included angle (outside corner) press enter 2 (two) times. so the conclusion of the ellipse is an elliptical arc (½) half-circle.

02. Insert block = insert AutoCAD blocks are the basic ability to insert images inside other files in the images, which are active at this time, causing the image file that is processed has grown in size, example: click on the inset window blocks Write (free), click Browse (for free), then to mark (√) in turn then (Ok). Then the image file already appear.

03. Making Block = on making this block can download the AutoCAD drawing blocks to another file. Click to create a block name (for free) on the definition of the block and then select the object, press enter then select the unit block of text settings (free), then the image file will be lost, see it open a new file, then click the blocks to make select a name that we gave at the beginning before, on the make-block box then click on the point of choosing. Then put a check mark (√) in the open in the block editor and press (Ok), and we block all images will appear in a new image file.

04. Point = at point or to click here, you can immediately download it via the setup panel (), choose a style point and click on the image to the points that we want (free), then to mark (√) the size of the tick on the set of nodes, and then click Ok. After we finished the installation, and then click specified point point (free), the dot will be visible.

05. Hatch = may also referred to as multiple rows selection, symbol or mark complete design that looks good, good, bite, sustained and sophisticated (but not the magic you know he2x ... joke). Let us continue, then Luke then a paper type, and select the template designs or click on the line that I//////I, and then other predefined (free) that you want and click Ok, and then click Add point of pickup, and then click Ok. If the project is too large, or vice versa, do not forget to set the angle and zoom.

06. Gradient = next